Friends who have just come into contact with Maya software must be unfamiliar with the operation of making hemp rope. Today, the editor has brought you the steps of making hemp rope in Maya. Friends who are not familiar with the operation, let's learn together!
1. Open the software and enter the operation interface, as shown in the figure:
2. Find the polygon primitives option under the create option, as shown in the figure:
3. Click on the polygon primitives option and find the cylinder option in the menu, as shown in the figure:
4. Click the cylinder option to create a cylinder in the perspective view, as shown in the figure:
5. Select the cylinder and set the parameters in the channel box as shown below:
6. After setting, press the Ctrl+D keys to copy one and adjust its position, and then switch the module to the animator option, as shown in the figure:
7. Find the create deformers option in the menu, click the create deformers option and find the nonlinear option in its sub-menu, as shown in the figure:
8. Click on the nonlinear option and find the twist option in its sub-menu, as shown in the figure:
9. Click the twist option and find the twist1 option in the channel box, as shown in the figure:
10. Click on the twist1 option and find the end angle option inside it, as shown in the figure:
11. Enter the value 3000 in the end angle input box, as shown in the figure:
12. After setting up, the hemp rope is ready, as shown in the picture:
The above are the steps for making hemp rope in Maya brought by the editor. Let’s learn together. I believe it can help some new users.
