Tutorial on how to solve the problem that Feige Shuanhuan cannot transfer files

Time: 2017-12-20Source: Huajun Software TutorialAuthor: dim sum

If your Feige cannot find other people or cannot transfer files, please check the following:

360 screenshot 20171220113024439.jpg

1. All the hosts that need to communicate may not be installed or Feige is not started (don’t laugh, this does happen)

2. The firewall software may prohibit Feige from accessing the network;

3. The built-in firewall of the XP system may prevent Feige from accessing the network;
Check method:
Control Panel - Network Connection - Local Area Connection - Properties - Advanced - Settings,
You can choose to turn off the firewall, or add the Flying Pigeon Messenger program in "Exceptions";
If you want to add an open port, please add TCP and UDP ports 2425 respectively;

4. The hosts may not be on the same network segment, please use the ping command to check;

5. Possibly due to dual network cards (IP), the network card (IP) bound to Feige by default is not in the same network segment as the other party; the command format to bind Feige to the specified network card (IP) is: ipmsg.exe [port ] /NIC IP address

6. If there are other inexplicable situations, you may need to reinstall the system.

That's itFlying Pigeon Passing LettersFlashing method tutorial, moreFlying Pigeon Passing LettersPlease go to the software related tutorialsHuajun Software Park software tutorial area!

Related articles更多>>

Popular recommendations