Laptops generally have built-in wireless network cards, which can use wireless network signals to access the Internet. But most desktop computers do not have wireless network cards, but now you can achieve wireless Internet access on desktop computers by simply connecting an external wireless network card. Nowadays, many brands of USB wireless network cards are used, but they do not provide network card drivers. What should I do? Today, the editor of Huajun brings you carefully selected solutions. I hope you will support and share more. If you like it, hurry up and get it!
The steps are as follows:
1. Here we take the Aigo MU4-WN727N wireless network card 150M as an example.
2. When the network card is first plugged into the USB port of the desktop, the desktop will actively search for the driver for the new hardware. In this case, the driver cannot be found for this network card. Here you can go to "Control Panel" - "Add Hardware" - "Device" You can see the newly added network card in "Manager".
3. Check whether there is a driver download address in the package or on the box of the network card you purchased. If not, go to the download area of its official website to find out whether there is a corresponding driver.
4. If the driver is still not found, we can search for the chip model used by the wireless network card on the Internet and determine the network card driver based on the chip model. Here we found that the Patriot network card uses the Rlink 3070 chip.
5. At this point we can download and install the "Rlink 3070 chip network card driver download" according to the chip model.
6. Or we can directly install the software "Driver Wizard". This software will find the missing drivers on the PC and provide download and installation. Although the found drivers do not exactly match, the core communication protocols used are the same and they are fully capable.
7. After the installation is completed, we can see the icon of the wireless network card in the lower left corner of the PC, and the "Device Manager" can also see that the driver has been installed successfully.
8. Find the wireless network, enter the password, and then you can use the desktop computer to access the Internet wirelessly.
This is how WinXP determines the version of the desktop wireless network card driver. If you are still worried that the brand of wireless network card you bought does not provide network card drivers, you can follow the above steps, which may be able to help you!
