Sometimes the Internet cannot be accessed due to IP address, then it is necessary to change the IP address. Recently, some users using WinXP system were surfing the Internet, but suddenly they could not access the Internet, and the webpage could not be opened. what to do? How should we solve this problem? Today, the editor of Huajun brings you a simple and easy-to-understand solution. I hope you will support and share the carefully selected content. If you like it, hurry up and get it!
Here's how:
Method one:
1. Right-click "My Network Places" on the desktop and click "Properties" in the pop-up menu, as shown in the figure below.
2. In the opened network connection window, you will find that there is only one local connection 5, and the displayed status is "Connected", as shown in the figure below.
3. Point the mouse to "Local Area Connection 5", right-click the mouse, and left-click "Properties" in the pop-up menu, as shown in the figure below
4. In the opened Local Area Connection 5 properties window, drag the scroll bar in the red box in the picture below to the bottom, click with the mouse to select "Internet Protocol (Tcp/Ip)", and then click the "Properties" button in the blue box .
5. In the pop-up "Internet Protocol (Tcp/Ip) Properties" dialog box, click the "Use the following IP address" radio button to set a static IP address. You can change the IP address and subnet after asking the network administrator. Enter the mask and default gateway separately. If you want to access the Internet through the network, you also need to enter the relevant address in the DNS server address below.
6. Finally, click the "OK" button in the "Internet Protocol (Tcp/Ip)" properties dialog box.
Method two:
1. Sometimes, there will be a small flashing computer icon in the lower right corner of your desktop taskbar. You can double-click it.
2. In the pop-up "Local Area Connection 5 Status" dialog box, click the "Properties" button to make settings in the "Local Area Connection 5 Properties" dialog box.
3. Then, you can follow step 4 of the first method above and continue.
The above is the entire content of the editor’s detailed introduction to the method of changing the IP address in WinXP. If you encounter the same problem as above, you can change your IP address, and you will be able to access the Internet normally again. If you don’t know how to change it, you can take a look at the above method. Users in need can try it!
