Everyone knows that a gateway is a connecting device between networks. It can translate different communication protocols so that two networks with different protocols can communicate with each other. The gateway used by our computer hosts is generally the default gateway, so how to set the default gateway in Win7 system? Today, the editor of Huajun brings you a simple and easy-to-understand setting method. I hope you will support and share the carefully selected content. If you like it, hurry up and get it!
The specific steps are as follows:
1. Open the "Control Panel", set "View by" to "Small Icons", then find and click "Internet Options".
2. Click "Change Adapter Settings" in the window that opens.
3. In the window that opens, right-click "Local Area Connection" and select "Properties" in the pop-up menu.
4. Find "Internet Protocol Version (TCP/IPv4)" in the "Local Area Connection Properties" window that opens, and double-click to open it.
5. In the "Internet Protocol Version (TCP/IPv4) Properties" window that opens, check "Use the following IP address", then enter the IP address and subnet mask, enter the default gateway address in the default gateway input box, and finally Click "OK" to complete the settings.
6. Test the gateway. Open the "Run" dialog box and enter the command "CMD" to open the MSDOS window. Then enter the command "ping 192.168.1.1 -t" in the window. If the information shows that the data is successfully received, the default gateway is configured successfully.
This is the detailed introduction to the method of setting up the gateway in Win7. A gateway is the "gateway" that connects one network to another. If you don’t know how to set up the gateway, you can follow the above steps to set it up. I hope this can help you!
