How does coreldraw software correct image tilt?

Select a bitmap image. We can see that the sea level of this bitmap is in the shape of a diagonal line.

Click the bitmap and execute the "Bitmap" → "Correct Image" command.

Rectify Image Dialog Box

Correct lens distortion

For photos that contain camera lens distortion, or lens distortion, you can correct two types of lens distortion (barrel and pincushion distortion), which bend straight lines in the photo. Barrel distortion makes a photo appear to be pushed out from the center. Pincushion distortion makes the photo appear to be pushed in from the center. Move the slider to the left to correct barrel distortion, and to the right to correct pincushion distortion.

Rotate and preview

Using the Rectify Image dialog box, you can rotate the image by moving the slider or entering a rotation angle. You can specify a custom rotation angle from -15 degrees to 15 degrees.

You can use the preview window to dynamically preview your adjustments. If you want to change the orientation of the image before straightening, you can start the adjustment by rotating the image 90 degrees clockwise and counterclockwise.

A display grid will be enabled in the preview window to help you straighten the image. More precise adjustments can be made by controlling the cell size of the grid. To enhance the contrast of the grid relative to the color of the image, you can change the color of the grid. You can also hide the grid if you want to preview the final result without grid lines. Additionally, you can zoom and pan the image in the preview window to evaluate the results.

Crop

By default, the rectified image will be cropped into the crop area shown in the preview window. The final image has the same aspect ratio as the original image, or it can be generated at an angle by disabling cropping and then cropping the image in the image window using the crop tool.

When the Crop Image checkbox is enabled, the rotated image will be cropped to maintain the aspect ratio of the original image, but areas outside the display of the smaller cropped image will be hidden. If you want to preserve the width and height of the original image, resample the final image by enabling the "Crop and resample to original size" checkbox.

The left picture shows the effect of cropping the image into a smaller size. The right picture shows the effect of cropping the image and resampling to retain the original width and height of the image.

How to take screenshots with coreldraw software:

Method 1 of taking screenshots in coreldraw

1 Select the picture, bitmap (menu bar)--Edit bitmap and automatically open corel photo-paint. After cropping, be sure to click Save and close corel photo-paint.

2. Return to coreldraw and the picture has just been cropped. You can also use it to draw a shape you want to intercept on the shape you want to trim. First select the graphic, go to Effect (menu bar) - Precision Crop - Place in Container and a big arrow will appear pointing to the shape.

3. The current page captured: Press the print screen sysrq key, then press ctrl + v to paste it into a file (coreldraw photoshop word, etc.), and you will get the current page captured.

Screenshot method two in coreldraw

Use the prtscsysrq key to take a screenshot. Click the prtscsysrq key and then open CD (coreldraw). Click "Paste" to paste the picture. Use QQ to take a screenshot. You can also use QQ to cut off the picture first, and then "copy" to open it. CD, click Paste, can also be pasted.

Cutout in coreldraw

1. File - Import, select the picture to be produced and open it in CDR (when importing the picture in CDR, you need to hold down the left mouse button in the interface and drag the mouse to set the size of the picture);

2. Bitmap - Contour Copy - High Quality Graphics. The system will automatically copy the picture. You can adjust the details of the copy under the tracking control on the right. You can see the preview after copying below the original image. If you are satisfied with the adjustment Then click OK;

3. Use the Ctrl+A keys to select all the graphics, execute: Arrange - Cancel Group, scatter the copied graphics to make them individual graphics;

4. Use the selection tool in the toolbar to select the graphics we don’t need, and then click the Delete key to delete;

5. Execute: File - Export, set the graphics format to JPG (the export parameter value is the default), so that we can use CDR software to extract the graphics we need.

Summary: The above is all about how to correct image tilt in CorelDraw software. I don’t know if you already understand it.