The workshop mode in "Fallout 4" can be regarded as greatly improving the degree of freedom of this game. Even the generator must be made by yourself. After making a generator, many players find that the wires cannot be pulled up no matter how hard they are pulled. Now let me tell you how to use wires in the game!

Why can't the wire be pulled up in "Fallout 4"?

First we need to be near the workshop and press the V key to enter the workshop mode. Friends should have basically experienced this, and there is no technical content. Or you can enter this state by operating directly on the workshop.

Then we find the generator item in the power option, which can be clearly seen. A total of:

Transmission wheel: 2

Copper wire: 4

Rubber: 2

Copper: 16

Porcelain: 1

These materials are very easy to find. Basically, following the main plot, it is more than enough to just build seven or eight of this most basic generators. As shown in Figure 1

Figure 1

Now that the generator is built, let’s introduce how to use it. It's actually very simple. We first need to build equipment that requires electricity. Here I just built one at random. Then in workshop mode, facing the generator space, we can pull out a wire from the generator. Then drag it to the device and press the space button again. As shown in Figure 2

Figure 2

It should be noted that there is a distance limit for wires. In addition to this small generator, if you have enough materials, you can also find large generators in the generator selection. To meet some devices with high electricity demand.

Summary: The above is the answer to why the wire cannot be pulled up in "Fallout 4". I hope it will be helpful to everyone.