CrystalDiskinfo is a convenient tool for testing hard drive values ​​and functions. It is available for both old and new models. The software supports the detection of solid-state drive and mechanical hard drive information. It uses S.M.A.RT. technology to detect and analyze the detailed information of the read disk. It can comprehensively, detailedly and intuitively understand the health status and various parameters of the hard drive. Then let the editor explain it to you. Let’s explain the parameters of crystaldiskinfo. How to fix the adverse reactions of crystaldiskinfo?

1. Interpretation of crystaldiskinfo parameters

1. read [MB/s]: indicates the reading speed.

2. write [MB/s]: indicates the writing speed.

3. mix [MB/s]: indicates the mixing speed.

First open the software and you can see many parameters of the hard drive, such as temperature, firmware, serial number, power-on times and power-on time, etc.:

Click Function - Chart, here crystaldiskinfo will clearly present various related information of our hard disk in front of us in a chart-like manner in the form of a drop-down menu.

Detailed interpretation

1. "Seg Q32T1" is a continuous test, which can be understood as the reading and writing speed of audio and video files.

2. Generally speaking, the nominal speed is this. If the test results are significantly different from the nominal speed, it is recommended to consult customer service.

3. The following three lines are all "4k random read and write", which basically shows the actual performance of the hard disk.

4. Generally speaking, this is closely related to system operation and determines the speed of file opening, closing, moving and other operations.

5. Q represents the queue and T represents the thread.

6. "4kQ4T8" refers to the performance of the hard disk under 4 queues and 8 threads.

7. The third line "4kQ32T1" is the performance of the hard disk under 32 queues and single thread.

8. In fact, we can manually set the number of test threads and queues according to our own needs.

2. How to repair defective crystaldiskinfo

1. Physical damage or failure: If your computer has experienced falling or other forms of physical damage, it may cause read and write errors or complete failure of the hard disk. In this case, it is recommended to back up the data and replace the hard drive with a new one as soon as possible.

2. Software problems:

There may be some problems with the operating system that cause the hard drive to not work properly.

For example, file system corruption or other driver issues may cause this to happen. In this case, trying to update the drivers or reinstall the operating system may resolve the issue.

3. S.M.A.R.T report: S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology) is a technology that allows the hard disk to monitor its operating status by itself. If a certain S.M.A.R.T indicator exceeds the preset safety range, the hard drive will be marked as "bad". In this case, you can check the S.M.A.R.T report to determine which indicator is abnormal.

4. Other factors: There are many other reasons that may cause CrystalDiskInfo to display "bad", including but not limited to computer environment problems such as unstable voltage, virus attacks that damage the data structure of the hard disk, etc. If you encounter such a problem, it is strongly recommended that you back up important data in time and contact professional technical personnel for consultation and processing.

The above is what the editor of Huajun compiled for you.Interpretation of crystaldiskinfo parameters, adverse reactions of crystaldiskinfoHere’s the guide, I hope it helps you