What should I do if the network search of Hikvision SADP equipment shows that the password is incorrect? Today, the editor will explain the solution to the problem of the network search of Hikvision SADP equipment showing that the password is incorrect. If you are interested, come and take a look with the editor. I hope you can Help everyone.

Step 1: Open the webcam client and log in. You need to register for the first time.

Step 2: Click Device Management at the top, then find the camera IP that needs to be changed from the bottom, and select it.

Step 3: After confirming that it has been selected, the selection bar will turn gray. At this time, click Modify Network Parameters above.

Step 4: Remove the small check mark above to fix the IP, and check it to obtain the IP automatically. Fill in the IP, mask, and gateway address of the same network segment as the monitoring host and click OK.

Step 5: Go back to the settings management and check that the camera IP has been modified and fixed.

The above is what the editor has brought to you on what to do if a network search for Hikvision SADP equipment shows an incorrect password. I hope it can help you.