How does MorphVOX Pro eliminate noise? Many users are asking this question? Let’s take a look at MorphVOX Please refer to the operation method of Pro noise elimination. Friends who need it can refer to it.

​​ 1. First download the MorphVOX Pro software and install it.

2. Double-click to open the software

​​ 3. After opening the software, click on the small speaker of the computer in the lower right corner, right-click and select recording device

4. The following window pops up. There are many virtual devices as shown below. You need to select the built-in recording device of the computer. Mine is ①, right-click and select Properties. (Yours may be different. For example, my ② is a virtual device. comes with this software)

5. Open the properties window, as shown in the figure below. Under the sound level tab, there are two options: microphone and microphone enhancement. The larger the microphone value, the louder the noise recorded. The smaller the value, the more tiny sounds will be ignored. .

The larger the value below, the truer the sound, but the greater the noise, that is, the more fragmented the sound. The specific parameters can be set as shown in the figure below. Once you understand the principle, you can adjust it yourself.

​​ 6. Click File>>Preferences and find the sound device

​​ 7. Check Echo Cancellation. If you don’t understand other options, just leave them as default settings. Of course, you can also try it.

​ 8. Finally click OK, try the sound effects, and restart the software. .

The above article explains the basic operation of MorphVOX Pro to eliminate noise. I hope friends in need can learn it.