Many people don’t know how to batch print Batchplot into PDF files? The article brought to you today is about how to batch print Batchplot into PDF files. If you still don’t know, let’s learn it with the editor.

Step 1: First, we install Batchplot (CAD batch printing tool) on this site. After Batchplot is installed, open the AutoCAD software, enter the "bplot" command in the command bar, and press Enter (as shown in the figure).

Step 2: If nothing happens after we enter the "bplot" command, you can click on the tool option, select "Loading Application" in its drop-down menu, and click to wait for loading (as shown in the picture).

Step 3: Then we enter the batch printing window. There are three printing methods: [Common] Frame Layer; [Block]; [Layer] (as shown in the picture).

Step 4: Next, we print and set the parameters. In this panel, just click on the required option settings according to your needs (as shown in the picture).

​​ 5Step 5: Confirm that the content you set is correct and click "Apply", so that it can be applied to the file we want to print. Then select the drawings to be processed. After selecting one, press the button below to batch select all drawings (as shown in the picture).

Step 6: Finally click OK to print, and we can see that the drawing is printed according to your own settings (as shown in the picture).

The above is the entire content of how to batch print Batchplot into PDF files brought to you by the editor. I hope it can help you.