Many people don’t know how to install Win10 and Win11 dual systems? The article brought to you today is about how to install Win10 and Win11 dual systems. If you still don’t know, let’s learn it with the editor.

Note: Before installing the system on dual hard drives, be sure to separate them into partitions.

​​ 1. Insert the prepared U disk boot disk, press f12 continuously during restart, open the quick boot menu, select the recognized U disk to boot and press Enter to boot from the U disk, as shown in the figure below;

2. After selecting the U disk to boot into PE, run the "one-click installation" tool on the desktop, and then click Browse first to find the iso or gho file of the win10 version we downloaded on the U disk. Generally, the c drive is the system disk. The win10 system is installed in the c drive, click OK, as shown in the figure:

3. After clicking Start, wait for the GHO installation program to be released, and the computer will automatically restart.

​ 4. After unplugging the USB flash drive and restarting the computer, the system will automatically complete the subsequent program installation. Until you see the desktop, the win10 system has been completely installed successfully, and then use the USB flash drive to install the win11 system again.

5. Insert the prepared U disk boot disk again, press f12 continuously during restart, open the quick boot menu, select the recognized U disk to boot and press Enter to boot from the U disk, as shown in the figure below;

6. After selecting the U disk to boot into PE, run the "one-click installation" tool on the desktop, then click Browse first, find the iso or gho file of the win11 version we downloaded on the U disk, and then install the win11 system on the second Partition (especially pay attention to the partitioning in advance, it is best to choose one of the hard disks to divide into two partitions, and then install win10 and win11 in different partitions), then click OK to start the installation, as shown in the figure:

​ 7. After clicking Start, wait for the GHO installation program to be released, and the computer will automatically repair the win10+win11 dual system boot (Note: Xiaobing U disk boot supports dual system repair), and then automatically restart the computer.

​​ 8. After unplugging the USB disk and restarting the computer, the win10 and win11 dual system menu will appear. After selecting the win11 system, the subsequent program installation will be automatically completed.

​​ 9. After selecting the win11 system menu, just install it on the desktop. After installing win11, we can choose the system to be used according to our dual system every time we turn on the computer.

The above is all the content that the editor has brought to you on how to install Win10 and Win11 dual systems. I hope it can help you.