MyDiskTest is a tool for identifying the expansion of mobile storage products such as U disks/SD cards/CF cards. So how to use MyDiskTest to identify U disks? Next, the editor will tell you about the method and steps of MyDiskTest to identify U disks. I hope it can help. to a friend in need.

​​ 1. Insert the USB flash drive to be tested. A Start Test button will appear on the interface. Click OK to start the test.

​ ​ 2. After the test is completed, the interface as shown in the figure is displayed. The identified capacity is 31484MB, which is consistent with the 32G stated by the merchant.

​​ 3. The editor also used software to conduct a reading and writing speed test. The results are consistent with the usage. The read speed is about 3M/s, which is typical 2.0U disk performance.

​ ​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​ Here are the steps for MyDiskTest to identify the USB drive. Friends in need, please come and read this article!