Perhaps some players do not know the extreme racing: How to adjust the horizon 4 spring? Then friends who are not clear can come and see the extreme racing brought by Xiaobian: Horizon 4 spring adjustment method, I hope it can help everyone to everyone Essence

The spring controls the range of the vehicle's weight. The harder the spring, the smaller the weight transfer during drift. This is suitable for narrow tracks and rapid transfer (weight transfer caused by rapid change). This is the principle, but I actually adjust the spring and anti -tilt rods in the same way, because in the case of drift, the two have the same role.

For front spring, you generally do not need a perfect balance. Balance only requires preset adjustment. Adjust the spring affect the steering reaction speed. The softer the spring turns, the more slow, and vice versa. If you find that the vehicle will jump forward when it is hit, you may want to soft the front spring. If you find that there is no response when fighting, you may need to tone the front spring. In my preset adjustment, the front spring hardness is determined by Formula.

Rear spring, you generally don't need to be perfectly balanced. Balance only requires preset adjustment. Adjusting the anti -tilt rod affects the speed of the rear of the car. If you find that the vehicle is drifting or the vehicle is too fast or slippery when the vehicle is giving the oil, you may have to soften your rear anti -tilt rod. If you find that the vehicle is not easy to swing or returned to positive at this time, you may have to tie your rear anti -tilt rod. In my preset adjustment, the hardness of the rear spring is determined by Formula.

Hanging height:

Most drifting players like to completely reduce the rear of the car, and the front of the car rises to 4 or 5. The front of the vehicle is slightly higher to help maintain the vehicle level when the deceleration/brake (weight movement). This can prevent slipping. In my preset adjustment, the height of the rear of the car is as low as possible, and the front height is 4 squares.

The above is the extreme racing brought by the editor: the level 4 spring adjustment method, don't miss it.