How does autocad2020 display line width? Maybe there are still many friends who are not sure. So those who are not sure can come and take a look at the method of displaying line width in autocad2020 shared by the editor. I hope that through the study of this tutorial, it can help everyone. .

1. First, open autocad2020 and enter the operation interface, as shown in the figure:

2. Find the arc command in this interface and draw an arc in the drawing area, as shown in the figure:

3. Select the drawn arc and find the line width option in the menu area, as shown in the figure:

4. Click the line width option and select a line width in the drop-down list, as shown in the figure:

5. After selecting the set line width, you can see that the arc has not changed, as shown in the figure:

6. Find the custom option below, click the custom option, find the line width option in its sub-menu, and check the option, as shown in the figure:

7. After checking the line width, you can find the line width display option in the following options, as shown in the figure:

8. Click the line width display option, and you can see that the current arc has become wider, as shown in the figure:

The above is the method of displaying line width in autocad2020 shared by the editor. Friends in need should not miss it.