AutoCADHow to set the classic mode in 2018? It's actually very simple. The author below will bring you the method of setting the classic mode in AutoCAD 2018. Friends who don't know how to do it can learn it. I hope it will be helpful to everyone.

​​ 1. First, open AutoCAD2018 and enter the default operation interface that has not set the AutoCAD2018 classic interface (generally the default interface is "Sketch and Annotation").

2. InoperateFind the following menu in the upper left corner of the interface and click it, then click to display the menu bar menu. Make sure that the status is hidden after the settings are completed.menucolumn.

​ 3. Click to open the Tools menu, click Options Panel, and then click Ribbon (B) to close the Ribbon. After closing, the interface is as follows:

​​ 4. Click to open the Tools menu, move the mouse cursor to the toolbar menu in sequence,AutoCADmenu. Then click and check the standard bar, style bar, layer bar, property bar, drawing bar, modification bar, and drawing order bar (this check operation can only select one at a time, just repeat it). After the setting is completed, the unsaved AutoCAD2018 classic interface is displayed.

5. After setting the required content for the classic interface, find the operation menu bar at the bottom of the interface to switch workspaces. Click to check Save current workspace as menu bar.

​​ 6. Save the current workspace as AutoCAD Classic. Here you need to manually enter "AutoCAD Classic" and click Save.

​​ 7. The AutoCAD classic interface after setting is saved like this. You can see that when you switch the workspace menu bar, there is an additional column "AutoCAD Classic". That is, the setting of the classic interface is completed. After that, the operation interface after opening AutoCAD2018 will default to the AutoCAD2018 classic interface.

The above is the method of setting the classic mode in AutoCAD 2018 brought by the author. Friends in need can read this article.