How to use dbc2000 to set up herodb? Some friends may not know how, so today I will share with you how to use dbc2000 to set up herodb. I hope that this tutorial can help you.

1. First, install dbc2000 on the computer. Open the control panel. If the displayed icons are different, click to switch.

2. Open --BDE Administrator (32-bit). If the name is different, the icon will be the same.

3. After opening, click -Object---New

4. This is a file that will create a STANDARD1

5. Rename this to HeroDB. Pay attention to the case. Be sure not to write it wrong

6. Add the server path, open the path directory, copy-paste it to the c drive (as shown in the tutorial). It is not recommended to put the server on the c drive. Other disks are acceptable.

7. Place the mouse on HeroDB and right-click to pop up the menu. Click apply---click ok again to start the process.

Server configuration:

Open the server console, the paths are the same, (there is a slash after the path, write less tutorial pictures, the software will prompt.) The upper and lower case are the same, click Next

Don’t change the second step. In the third step, if you play by yourself, change the gateway to 1. Click next

Numbers 4, 5, 6, 7, 8, and 9 are all defaulted. Click Generate Configuration--Save, the configuration is completed

The above is the method shared by the editor to set up herodb using dbc2000. Friends in need should quickly read this article.