Don’t you know how to set up the epsxe emulator yet? This chapter mainly introduces the setting method of epsxe simulator. If you don’t understand it yet, please follow the editor to learn it. I hope it will be helpful to you.

1. Since the epsxe simulator uses plug-in running mode, you must set up the plug-in to run the game. Generally, the first time you run the software, you will automatically be prompted for a configuration wizard. You can also enter the software interface and click "Configuration" - "Configuration Wizard" to operate

2. Click the "Settings" button

3. Select BIOS format PAL

4. Select video plug-in

Note: Because everyone’s graphics card is different, when choosing a video plug-in, you need to know which plug-in your computer uses to achieve the best display effect.

5. Select the appropriate video plug-in in the picture above and click the "Configure" button in the lower right corner to enter the plug-in configuration interface.

Tip: It is recommended to click "Beautiful Picture" first, and then select the window mode at the top, so that the game will not stall due to the CPU being too fast.

6. Next step is to set the audio. Also click the "Configuration" option to change it (default recommended)

7. Set up the optical drive and select the second option epsxe CDR WNT/W2K core, as shown in the figure:

8. Finally, set the handle keys. You can set them according to your personal preferences. The default handle settings are as shown in the figure:

9. After the above configuration is completed, everyone can click "File" to load the game and play.

Above, I have shared with you the EPSXE simulator setup method. Friends in need should hurry up and read this article.