Some time ago, many friends asked about the related operations of PPT cutting and design of text. Below, the author shared the detailed operation content of PPT cutting and design of text. I believe it will be helpful to everyone.

Let everyone take a look at the result.

Step 1: Use the text box to type the text - "Cut". You can choose "Helvetica" for the text font, which will look better.

Step 2: Click "Cut" on the text, right-click on the mouse, select "Save as Image", save the text in image format, and put it on a computer disk or on the computer desktop for later use.

Step 3: Insert the text in the image format in step 3 into the current PPT.

Step 4: "Cut" the image and make a copy for later use. Select the image "Cut" and press ctrl+c and then ctrl+v. Then, use the mouse to move the two "cuts" farther apart.

Step 5: Select the first "cut" picture above, select "Format" - "Crop", and adjust the range you want to cut through the pink mark points. As shown in the blue horizontal line in the figure.

*Be careful to remember the position of the lower part of the text you cut off. Here I cut the border to the first stroke of the word "口" of the word "cut". This step is for the cutting operation in step seven.

Step 6: Select the second "cut" picture and cut the text as shown in the picture.

Step 7: As shown in the picture, color the lower part of the "cut" part. Operate in sequence: "Format"-"Recolor"-Select a color

Step 8: As shown in the picture, press and hold the green operating point with the mouse to rotate the picture and adjust it to the appropriate position. At this point, great work has been accomplished.

Notice:

It is recommended that the PPT software version be more advanced, this is the 2007 version. Lower versions may not work.

Come and learn the detailed operation content of PPT cutting and designing text. It will definitely help everyone.