C4D has many advantages and is deeply loved by users. However, for some novice friends, it is still a bit difficult to add vertical stripes to bottle caps. Today I will explain the operation process of adding vertical stripes to bottle caps in C4D. Let’s take a look at it. I believe it will be helpful.

1. Create a cylinder with a shape close to the bottle cap, and color the lines into 180 rotation segments.

2. Switch to the editing object and delete the low cap. Enter edge mode to mirror the rotated surface and cut out two edges.

3. Select the segments between the rings, and use the sliding tool to clone the rotated segments with half the distance.

4. Adjust the viewing angle, turn off Y-axis outward scaling and chamfering, and deselect to remove the N-gons line.

5. Cyclically select both faces, scale them in the same way, and maintain the horizontal line with the rotated segment.

6. Rotate the sides of the water chestnut and chamfer them at distances of 1 and 2 respectively.

7. Adjust the viewing angle to the top surface of the cover, cancel the mirror cycle and cut out two sides, and then use move and zoom to adjust the status.

8. Finally, you can freely choose to add materials, floors, lights and other decorative elements.

The above article explains the operation process of adding vertical stripes effect to bottle caps in C4D. I hope friends in need can learn it.