Many friends are not familiar with the Maya software and do not know the operation of modeling a thermos cup. Here are the graphic and textual steps for modeling a thermos cup in Maya. I hope it will be helpful to you.

1. Open Maya, create a new cylinder, select the top surface, and delete the surface.

2. Add two looping edges to the bottom of the cup and clamp the edges. Because the entire cup will be smoothed in a while, clamp the lower edge first.

3. Add a loop edge to the upper part of the cup, that is, the cup mouth, and squeeze out the protruding part of the cup.

4. Add the edge loop again, reduce the top edge, add the edge loop, adjust, add four edges in the middle, and expand it to the middle part.

5. Add a loop edge to the turning part to clamp the edge. After the entire model is enriched, perform smoothing processing.

6. Copy a water cup, delete the upper part, and use the remaining part as the lid. Finally, you can cover the cup, add a Boolean material, and the whole cup comes out.

The above is the graphic and text operation steps of the Maya modeling thermos cup that the editor has brought to you. Let’s learn together. I believe it can help some new users.