Aisi Assistantis a powerfulApple mobile phone managementtool. Although the official download version of Aisi Assistant provides a wealth of application downloads and settings management, other main functions are still forFlash the machine, so what are the specific steps to flash the phone with Aisi Assistant?

Aisi Assistant Flashing Tutorial:

1. Download Aisi Assistant

2. Cancel the password of the mobile phone before connecting it, otherwise the information cannot be read. Connect the mobile phone to the computer to display the picture below. At this time, the "product type" of the mobile phone can be displayed.

         
3. Switch to the one-click flashing interface of the toolbox, then click the query SHSH button, and follow the prompts to enter the DFU mode (the method of entering DFU mode is: 1. Keep the device in power-on mode or recovery mode, and plug in the data cable. 2. First Press and hold the HOME button of the device, then press and hold the power button of the device until the device screen turns off, then release the power button of the device about 4 seconds later, but do not release the HOME button until the software prompts "success" then release the HOME button) as shown below:

4. Select the corresponding firmware according to the red part in the blue box, "Product Type: iPhone3,3", or the firmware you want to flash (the firmware correspondence table is as follows)

5. Download the firmware that needs to be upgraded/downgraded, as shown below: If you have already downloaded the firmware, you can ignore this step;

6. How to check the progress of firmware download:

7. If the firmware download is completed, we will start flashing the phone next. Click "One-click Flash" in the "Toolbox" of the AISI Assistant, and "Select Firmware" in the operation bar on the upper right.

8. This firmware is the firmware just downloaded. The path to open is in the C drive of the Aisi Assistant installation directory (if it has not been changed)--Program Files--Aisi Assistant---download folder, as shown below.

9. After selecting the firmware, as shown below:

10. Click "Flash Now"

11. Wait for completion, as shown in the picture, flashing is completed!