How to modify scanned files? How to modify the contents of scanned files using a computer

The scanner is a tool that we often use, and everyone is familiar with it. We generally use a scanner to scan documents directly, and the scanned file format is JPG image format, which cannot be modified directly. How to modify the scanned files? What can be done? Let me tell you how to modify the scanned files.

Here's how:

1. Open the scanner, set the parameters, put the file into the tray, and click scan.

2. After scanning, the file will be automatically saved to the computer in JPG image format.

3. Use PS software to open the scanned pictures.

4. As shown in the figure below, we need to change the unit price of the variable platform installation to one unit price. Use the patch tool to first remove the data that needs to be modified.

5. Then use the patch tool to patch the required data to the above two lines.

6. The modification is completed and the unit price becomes unified data.

This concludes the introduction to the method of modifying scanned files. Friends in need can refer to the above methods and give it a try. Take a look at the above content and you will know how to do it. The steps are very simple and convenient.