Three -screen screen explanation:

The three -screen screen display is also called a three -screen display, that is, one host displays the content on the three display, and different screens can be displayed on different display screens according to different needs. Save costs under the premise of achieving three -screen display effects.

Tools/Preparation:

1. Operating system: Win7 32/64bit or OS;

2. The motherboard that supports SLI functions;

3. NVIDIA graphics cards (GTX295, GTX590, GTX690 do not need SLI); GTX295, GTX590, GTX590, GTX690;

4. Memory: 2GB or above;

5. Three -screen screen output interface, you need to select the official website of NVIDIA: enter the official website of NVIDIA;

Step of operation:

Take the main card dual DVI+ sub -card DVI output as an example:

1. Taking the ASUS GTX670 as an example, the explanation of the official website of NVIDIA is as follows:

2. First of all, set up a platform, the graphics card independent power supply, the bridge connection, and the three DVI outputs are connected;

3. Enter the system, install the driver of the graphics card, open the NVIDIA graphics card control interface, display the SLI has been enabled, then set the three -screen screen, and select [Surrow to expand more monitors];

4. After selecting the [Application] below, if there is no problem, the information of the display of 3 interface connections will appear;

5. After [Application], the three -handed screen can basically be realized. You can see that the entire desktop is placed on 3 display. The picture is as follows:

6. After the application, you will ask if you need to do a border correction. Select [No, the standard resolution] (you can choose by yourself);

7. Set the resolution and press [Complete] to complete the entire setting.

8. After the establishment of the SLI+Sanjin screen, let's look at the name of the display. Here

9. If a resolution is required, you can adjust it in the location shown in the figure below:

10. If you need to adjust the desktop ratio, you can adjust here:

11. If we do not do Surrow, choose [to reach the best 3D performance], it is not the status of the joint screen, but only in the main DVI port;

12. The entire desktop is displayed on the main DVI mouth. The full picture is as follows:

13. From the beginning, it shows that there are interface restrictions on the output of the three -handed screen. If we choose the main card DVI+HDMI, the second card DVI mode:

14. We can see that the above model can achieve three -screen screen.

Through the above icon, we can see that after selecting Surrow, there will be a prompt to ask the display to change the output port. To make the three -screen screen of the NVIDIA card SLI, you also need to pay special attention to the requirements of the graphics card output interface!

The above is the operation step of the three -screen screen of the NVIDIA graphics computer. If the user feels that the border in the middle after the three monitors are connected, you can choose a borderless display so that you can turn into a "super" display, but It should be noted that the borderless display is relatively fragile.