Just a few simple steps to install and securely protect your hard drive data. The installation of Restore Wizard will not affect the hard disk partition and operating system. Easy installation, dynamic protection, real-time instant recovery Freezing Point restoration tutorial (using and deleting Freezing Point).

​

Freezing point restoration wizard

1. Installation of Freezing Point

1. It can only be installed under win2000 and xp systems, other systems are not supported.

2. Pay attention to choosing a protected hard drive during installation...

3. After entering the system, the hotkey to call out the software is ctrl+AIt+shift+F6. You can also hold down shift and double-click the task icon to open it. After opening, you can set a password. The default password is empty.

4. There are three options in the main interface:

(1) The first one is the protection state, that is, the protected hard disk is restored every time it is started. (2) The second is a free option. For example, the system is being protected. We choose the second option. The default is 1. This 1 means that the machine is in an unprotected state after the machine is restarted. , automatically switches to the protection state, then the operations we do after the restart will be automatically protected when the machine restarts for the second time.

(3) The third one is the non-restore state. After restarting, the Freezing Point chart will keep flashing red

2. Deletion of Freezing Point

1. Press ctrl+AIt+shift+F6 to call out the interface. If you have not modified it, the password is empty and enter the software setting interface.

2. Select the third option, which means giving up protection and restarting the computer.

3. After restarting, the Freezing Point icon flashes a red x, indicating that Freezing Point no longer protects the hard drive. 4. Run the Freezing Point original program, the delete option will appear, click delete. It can protect your hard drive from viruses, recover deleted or overwritten files, completely clear programs that failed to install, and avoid data loss caused by system crashes. Just a few simple steps to install and securely protect your hard drive data. The installation of Restore Wizard will not affect the hard disk partition and operating system. Easy installation, dynamic protection, and real-time instant recovery are suitable for Internet cafes and personal use. You can install it directly. To uninstall: ctrl+AIt+shift+F6 and then enter the installation password. Restart after uninstalling to take effect. To completely uninstall, uninstall and download. Direct installation, the three C D E disks provided by default are protected, you can set them according to your own requirements. Start the software ctrl+AIt+shift+F6 and set three password options. The first one is protected status and the second one is free option. Three are non-restore states. For example, the system is being protected. We choose the second option. The default is 1. This 1 refers to the non-protected state after the machine is restarted. When the machine is restarted, it will automatically switch to protection. state, then the operations we do after the restart will be automatically protected when the machine is restarted for the second time. There is no need to introduce the third unprotected state after selecting it:) When you see the freezing point chart in When the red
In fact, it is not difficult to use such software. If you study it regularly, you can do it. If you have any questions, you can take a look at what the editor has provided.