How to unfreeze Freeze Point Restore Wizard? Freeze Point Restore Wizard is a powerful system restoration software. When we use Freeze Point Restore, just one-click restart will restore the computer to the initial state (the state before Freeze Point was installed), but if We need to modify the computer or install When using some software, you must stop the Freezing Point software, that is, unfreeze the computer. Since there is a saying about thawing a computer, there must also be a saying about freezing. Benzhu mainly talks about how to thaw the Freeze Point Restore Wizard and how to use the Freezing Point Restore Wizard to freeze. So let’s take a look. Let’s take a look at how to thaw the freezing point?

How to defrost the Freezing Point Restore Wizard?

1. Open the software, hold down shift and click on the ice point icon

Figure 1: Open the software

2. Enter the password. This password is the password we set during installation.

Figure 2: Enter password

3. Enter the software interface. If you want to defrost, we have two options. Choose how many times to restart. After filling in the number of times and the number of restarts, the computer will automatically enter the frozen state. If you choose to defrost after startup, then Thaw permanently.

Figure 3: Select Unfreeze

4. After selecting the options, we click "Apply and Restart" to pop up the following dialog box, click OK.

Figure 4: Restart

5. The computer will then restart. After the restart, the Freeze Point icon in the computer will have a red X, which indicates that Freeze Point Restore has been defrosted.

Figure 5: Software icon